TFT1.3inch resolution 240x240 smart wearable and E-cigarette

Key Specifications/Special Features:

Display type: TFT
LCD size: 1.3 inch (Diagonal)
Number of pixels: 240(H) RGB x 240(V)
Module size: 26.16x29.22x1.5mm
Active area: 23.4x23.4mm
Interface: 4 line SPI
Driver IC: ID9851
Luminance (cd/m2): 350 (TYP)
Viewing direction: All View
Operating temp: --20-70 ℃
Storage Temp: -30-80 ℃
 

Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.

One. Low power consumption, strong anti-interference ability OLED Display Module

In addition to the circuit and display power consumption of CRT displays, there is also the power consumption of the Display Screen, while the Liquid Crystal Display is mainly the backlight and circuit power consumption 0.42-1.3 Inch OLED. The power consumption of the display screen can be ignored, like EMC's 15-inch display BM- 568, its power consumption is only 35 watts, which is nearly 50% less than CRT products with the same display area. In addition, because the liquid crystal display does not use the CRT and electron gun to image like a CRT display, it does not need to consider the high radiation effect caused by increasing the electron beam emitted by the electron gun, but only obtains the brightness through the backlight emitted by the fluorescent tube, so it has a stronger Anti-interference ability, even in the environment with relatively concentrated light, it will receive a good display effect LCD TFT .

two. Higher picture quality Oled Display

The traditional CRT monitor adopts the analog display method, and the signal output of the display card adopts the analog output method, which may cause the loss of the image during the transmission process, resulting in the decline of the picture quality, while the signal transmission of the liquid crystal display adopts the digital method. Direct input of illegible characters from the graphics card will not cause signal loss. However, most LCD displays still use VGA interfaces for analog displays, and only a few manufacturers such as EMC, Samsung, ACER and other manufacturers have installed digital video signal interfaces Transparent OLED.

three. Use functions more intelligently OLED Microdisplay

Due to the different materials and technologies used in liquid crystal displays, some of its parameters are generally relatively fixed, which requires the performance of the display to be adjusted more intelligently. In this regard, each manufacturer has its own mature technology. In general, There are two main ones, one is similar to EMC Auto-set automatic adjustment and optimal setting function, as long as one of the parameters is adjusted, the other parameters are automatically adjusted to the corresponding value, and it is the best value to ensure that the display is the most Good results. The other type uses a single-key recovery function, that is, one-key pre-made, and all parameters can be changed back to the factory preset settings with a single press Active Matrix.