Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: 2.4 inch 240x320
Brand: ESEN
Size: 2.4 inch TFT
Display Type: TFT
LCD Drive Mode: Multiplex Drive LCD Module
Interface: RGB
Panel Type: TN
Lead Time: 15 - 20 days
LCD Type: a-Si TFT
Type: Color
LCD Size: 2.4 inch
Customized: Customized
Model Number: K240I20304
Brand Name: Newvision
Origin: China (mainland)
Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks Display-screen.
The LCD TV structure mainly includes: Lcd Module, power supply module, drive module (mainly including main drive board and tuner board) and button module. Generally, the LCD Module has been tested for electromagnetic compatibility (EMC) by the manufacturer before production. EMC is an inevitable and important issue in LCD TV design. If the EMC design is not good, it will lead to weak interference tolerance, water ripples and stroboscopic problems during the TV broadcast, and in serious cases, it will be unable to watch. The following mainly briefly describes the design of the key parts of EMC:
1. The whole machine design Transparent OLED
The use of shielding cover: Generally, the LCD module, the main control board and the power supply part need a shielding cover.
The main frequency of the main chip is the main cause of electromagnetic interference. Frequency harmonics of the main frequency are most likely to cause electromagnetic interference. In the EMC experiment, the electromagnetic interference of the frequency harmonics of the main frequency is very large. Certain shielding measures should be added to the main chip during design. The main shielding measure is to add a metal shield to the digital board. Adding a shielding cover is the most effective way to resist electromagnetic interference LCD Display Module.
2. Driver board design Project Touch Panel
The main driving board of LCD TV mainly includes: analog signal part, high-speed digital circuit part, noise source DC-DC power supply part. On the driving board of the LCD TV, the ground of the power supply part (DC-DC) is mainly separated from the ground of other parts such as decoding and main chip processing to reduce the interference of the power supply to the image display and TV sound Liquid Crystal Display.
DC-DC power supply part and ground: On the printed circuit board, the power line and the ground line are the most important. Let the analog circuit and the digital circuit have their own power and ground paths respectively. The most important means to overcome electromagnetic interference is to ground.
Integrated chip: In the same integrated chip, the analog ground and digital ground are also laid separately. For example, the AD9883 analog-to-digital conversion chip AD9883 is often used in the main driving board of LCD TV. We can separate the ground of the analog part of the chip from the ground of the digital part when designing the printed circuit board. Finally, a relatively short wire is used to connect the two single points. Or connect the two grounds through a 1nF bypass capacitor.
Three, power module design Thin Film Transistor
The two main functions of the power supply are to drive the backlight of the LCD Screen and provide DC power for other modules (including drive modules and key modules). The design of the power module directly affects the entire system. If the design is not good, it will cause large water ripples on the TV, and in severe cases, it will cause the TV to be unusable. At the same time, it will seriously affect the normal use of other nearby equipment. The power supply part of LCD TV adopts switching power supply. The reason for the electromagnetic interference problem caused by the switching power supply is very complicated. When designing a switching power supply, it is necessary to prevent the switching power supply from interfering with the power grid and nearby electronic equipment; it is also necessary to strengthen the adaptability of the switching power supply itself to the electromagnetic interference environment.
Packaging: Carton
Productivity: 3 Million Pieces/Monthly
Transportation: Ocean,Land,Air,Express
Place of Origin: China
Supply Ability: 3 Million Pieces/Monthly
Certificate: ISO and RoHS
HS Code: 901383010
Port: ShenZhen
Payment Type: T/T
Incoterm: FOB
You Might Also Like
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.